Scotchkote 3065BG Urethane Coating has been specifically developed as a 100% solids coating with a degree of flexibility for hand application on metal and concrete surfaces in contact with fresh water, sea water and effluent. The product can also be used for protection of field girth weld joints on pipeline systems.
Scotchkote 3065BG Urethane Coating combines good application characteristics with excellent corrosion protection and chemical resistance.
Scotchkote 3065BG Urethane Coating is designed for application by brush or trowel at thickness between 500 – 1000 microns.
Scotchkote 3065BG Urethane Coating is suitable for use on both steel and concrete surfaces. Scotchkote 3065CSL Urethane Sealer should be used as a primer for concrete surfaces.
•Adhesion—Excellent to both blast cleaned and mechanically scraped surfaces.
•Corrosion Resistance—Excellent even under aggressive immersion conditions.
•Chemical Resistance—Virtually unaffected by most industrial chemicals.
General Application Steps
- Remove oil, grease and loosely adhering deposits.
- Abrasive blast clean steel surfaces to NACE No. 2/SSPC-SP10 near white metal, ISO 8501:1, Grade SA2½. Scarify or lightly blast concrete surfaces and seal with 3M™ Scotchkote™ 3065CSL Urethane Sealer.
- Apply Scotchkote 3065BG Urethane Coating at the specified thickness.
- Allow to cure.
- Visually or electrically inspect the coating for defects.
- Repair defects, if any.