Close
3M Scotchkote 321 Liquid epoxy Rust Preventive Coating
- Designed for room temperature drying as well as baking
as per cure requirements. - Combines good application characteristics with
excellent corrosion protection. - Designed for application by brush, roller, dipping or spray.
- Suitable for use on mechanically prepared steelwork or
high pressure water cleaned steel, (abrasive blasting is
not mandatory). - Can be applied over existing coatings.
- Can be used as a two coat primer/finish system or
overcoated with Rust preventive clear top coats
Close
3M Scotchkote 3065 BG Urethane Coating
Product Description Scotchkote 3065BG Urethane Coating has been specifically developed as a 100% solids coating with a degree of flexibility
Close
3M Scotchkote 3065 Urethane Coating
- Adhesion— Excellent to both blast cleaned and mechanically scraped surfaces.
- Corrosion Resistance— Excellent even under aggressive immersion conditions.
- Chemical Resistance— Virtually unaffected by most industrial chemicals.
Close
3M Scotchkote Epoxy Ceramic Surfacer CR 511
Technical Details
- Combines good application characteristics with good erosion and corrosion resistance.
- Designed for application by brush.
- Provides a low friction surface improving flow rates in pumps etc.
- Meets BS6920 criteria for contact with potable water.
- WRAS Water Regulatory Advisory Scheme approved product.
- Available in 1kg x 4 pack or 3kg x 4 pack.
Close
3M Scotchkote Epoxy Coating 145 UC
Protects containment areas against spills and tank breaches.
Close
3M Scotchkote Epoxy Coating 152 LVAS+
- Resistance to wide variety of hydrocarbon products & industrial chemicals.
- Heavy duty solvent free refurbishment systems for tank roofs.
Close
3M Scotchkote Epoxy Coating 162 HB/162HBL
Cable Coating/Insulation Coating, Corrosion Protection, Corrosion Protection Coating, Electrical, Weather Protection
Protects internal and external surfaces against attack from aggressive chemicals and fuels.
3M™ Scotchkote™ Epoxy Coating 162HB provides excellent pipeline corrosion resistance for both internal and external surfaces. This 100% solids lining can be used to coat pipes, tanks, vessels and other equipment in contact with sea water, raw water and wastewater. Scotchkote™ Epoxy Coating 162HB may be used on concrete and cementious surfaces when used with Scotchkote™ Epoxy Sealer SP 810.
Close
3M Scotchkote Epoxy Coating 175UC
- Combines good application characteristics with excellent corrosion protection and ultimate chemical resistance.
- Applied in two or more coats by brush or roller.
- For use on steel and concrete surfaces with an appropriate primer.
Close
3M Scotchkote Epoxy Coating EA 29
- Combines good application characteristics with excellent corrosion protection.
- As a primer, it offers long term corrosion protection of ferrous metallic substrates.
- As the basis of multi coat system, Scotchkote Epoxy Coating EA29 can be over coated with itself or with other Scotchkote finishes.
- Adhesion - Excellent to both blast cleaned and mechanically scraped surfaces.
- Corrosion Resistance - Excellent even under aggressive conditions.
- Chemical Resistance – The fully cured coating offers outstanding resistance to aqueous solutions and wide range of industrial chemicals.
- onsult 3M Technical for specific chemical exposure.
- Temperature Resistance – Suitable for use up to 100°C in dry service condition
Close
3M Scotchkote Epoxy Coating GP 220
- Corrosion and Chemical resistance: Excellent even in severe Industrial& harsh marine environment.( ISO 12944 C-5 I & C-5 M).
- Is designed for application by brush, spray or roller
- Apart from Abrasive blasted surface, the product is suitable for application on mechanically prepared steelwork or high pressure water cleaned steel.
- Compatible with tightly adherent aged coatings.
- Can be used as Direct to metal / Intermediate / top coat and also can be over coated with variety of top coats as required.
- Temperature Resistance: Dry service temperature range upto 100°C
Close
3M Scotchkote Epoxy HT Lining HT 517
Scotchkote Epoxy HT Lining HTX 517 has been specifically developed as a 100% solids epoxy coating for resurfacing and lining equipment operating at high temperatures.Product Features:
- Combines good application characteristics with good corrosion and temperature resistance
- Designed for application by brush or plural feed hot spray
- Provides a high build protective system capable of resisting wet heat up to 150°C
- Primarily designed for resurfacing and lining metal components
- Excellent adhesion to correctly prepared metal surfaces.
Close
3M Scotchkote Epoxy Metal repair EG 503
Protects pumps, turbines, scrolls & valves against erosion from corrosion, chemical abrasion and impingement attack
Close
3M Scotchkote Epoxy Metal repair EG503
3M™ Scotchkote™ Epoxy Metal Repair EG 503 is a specifically developed high performance metal compound that provides good mechanical strength combined with easy machining properties.
- Combines good machining characteristics with good mechanical properties
- Product is designed for application by trowel or spatula at thicknesses up to 12 mm
- Provides outstanding cold weld capabilities
- Designed for use to repairs to cracked casting and rebuilding worn shafts, bearing housings and flanges
- Excellent adhesion to correctly prepared metal surfaces
Close
3M Scotchkote Epoxy Metal Surfacer FG 502
Protects against attack from bi-metallic corrosion, chemicals and high operating temperatures n No shrinkage
Close
3M Scotchkote Epoxy Primer GP120+
Combines good application characteristics and excellent corrosion protection.
- Brush, roller or spray.
- Can be used as a two coat primer/finish system.
- Suitable for manually prepared or high pressure water cleaned steel.
- Silver
Close
3M Scotchkote Liquid Epoxy Coating 321
3M™ Scotchkote™ Liquid Epoxy Coating 321, can be used as a patch material, girthweld coating, and pipeline rehabilitation in a wide variety of other field applications where corrosion protection coating of metal is required.
Close
3M Scotchkote Urethane Coating 3065 CSL
Chemical attack and ingress Carbonation damage Corrosion of reinforcement bars Cracks, disbandment Solvent Free Elastomeric Polyurethane
Close
3M Scotchkote Urethane coating UV 870
- Scotchkote Urethane coating UV 870 combines good application characteristics with with excellent gloss and colour retention.
- Scotchkote Urethane coating UV 870 is suitable for use in corrosion protection applications.
- Abrasion: Good resistance to abrasion and mechanical damage.
- Adhesion: Excellent on correctly prepared and primed surface.
- Chemical Resistance: The fully cured coating offers excellent resistance to aqueous solutions, Oils, fats and wide range of industrial chemicals.
- Temperature Resistance: Dry service temperature range upto 100°C
Close
3M™ Scotchkote™ Epoxy Coating 152LV
- Approved by London Underground for ease of application and its corrosion protection of up to 25 years.
- Offers 25 years service life to first maintenance.
- London Underground Product ID 146.
- Network Rail Line Specification RT98, now NR/LV/CIV/039.
- Developed as a surface tolerant anti corrosive coating for steel.
- Good application with excellent corrosion protection.
- Excellent chemical resistance.
- Volume solids 99.2%.Theoretical coverage 2.5 sq m per litre at 400 microns dft.
- Available in 5.0 litre units in Black, Light Grey, Off White and Green.
- Available in 20 litre units in Grey and Off White only
Close
3M™ Scotchkote™ Liquid Epoxy Coating 323
It can be used as a patch material, girthweld coating, a stand-alone coating for pipeline rehabilitation, and in a wide variety of other field applications where corrosion protection coatings of metal are required
Close
SK SP 810 Concrete Sealer
3M™ Scotchkote™ Epoxy Sealer SP 810 is a high performance, low viscosity, 100% solids coating designed for use as a multipurpose floor sealing and priming system.
