Showing 1–24 of 35 results

Close

3M 2135 Resin

  • Resin, Wet-Niche Potting Compound, 3.3 cubic inches, 1.83 oz
  • Resin, Wet-Niche Potting Compound, 3.3 cubic inches, 1.83 ounce Package. Meets NEC Requirements to allow the use of Rigid Non-Metallic Conduit in the Installation of Wet-Niche Underwater Lighting
Close

3M Scotchcast Electrical Insulating Resin 4

  • 3M™ Scotchcast™ Electrical Insulating Resin 4 is a two-part epoxy insulating and encapsulating resin.
  • Its compatibility with solid and synthetic cable insulations and jackets makes Resin 4 an excellent insulator and sealer for cable splicing.
Close

3M Scotchcast Electrical Resin 10

  • 3M™ Scotchcast™ Electrical Resin 10 has a thixotropic (heavy paste) consistency that makes it useful for applications requiring a thick coating. a heavy layer, applied by spatula, extrusion, buttering or trowelling, cures with minimum sagging.
Close

3M Scotchcast Electrical Resin 208

  • 68 Shore D hardness
  • Has 48-hour gel time at 73.4 degrees F (23 degrees C)
  • Useful for coating coils, transformers, motors, modules, electrical and electronic components
  • Comes in reddish-brown color
  • 1-gal capacity
  • Withstands a temperature range of 32 to 266 degrees F (0 to 130 degrees C)
  • Elongates 75% longer than its original size for easy insulation or wrapping
  • Chemical- and moisture-resistant
  • MIL-I-16923E, MIL-I-16923G Certified and RoHS 2011/65/EU Compliant
  • 8 lbs/kit
Close

3M Scotchcast Electrical Resin 210

  • 3M™ Scotchcast™ Electrical Resin 210 is a 100% solids, room-curing, epoxy resin system.
  • It is suggested for insulating and sealing motor-winding end turns and slot sections.
Close

3M Scotchcast Electrical Resin 226

  • 3M™ Scotchcast™ Electrical Resin 226 is a rubbery, castor-based, repairable polyurethane that has very low viscosity and excellent hydrolytic stability (passes MIL-I-16923G and naval avionics reversion requirements).
  • Its low volatility at room temperature minimizes potential toxicity.
Close

3M Scotchcast Electrical Resin 235

  • 3M™ Scotchcast™ Electrical Resin 235 system has permanent semiflexibility, thermal shock and impact resistance, good electricals and adhesion properties.
  • Very low viscosity and good wetting ability allow for complete impregnation of small voids.
Close

3M Scotchcast Electrical Resin 241

  • This filled version of 3M™ Scotchcast™ Electrical Resin 235 offers many of the key features of 235 plus lower shrinkage,
  • improved thermal and mechanical shock resistance, and increased thermal conductivity.
Close

3M Scotchcast Electrical Resin 250

 

  • 3M™ Scotchcast™ Electrical Resin 250 has high-temperature stability, good electrical and physical properties, and low viscosity.
  • It is used where adhesion, mechanical strength and good electricals at high temperatures are needed.
Close

3M Scotchcast Electrical Resin 251

  • This medium viscosity, filled version of 3M™ Scotchcast™ Electrical Resin 250 offers many of the same advantages plus lower shrinkage,
  • improved mechanical and thermal shock resistance and higher thermal conductivity.
  • It has been tested to the requirements of MIL-I-16923G.
Close

3M Scotchcast Electrical Resin 252

  • 45 Barcol hardness
  • Has 23-minute gel time at 248 degrees F (120 degrees C)
  • Suitable for use in dip coating and wet winding applications
  • Comes in reddish-brown color
  • 20-lb capacity
  • Withstands temperatures of 311 degrees F (155 degrees C)
  • Smooth and uniform coatings can be achieved with minimal dripping
  • Greater mechanical strength and temperature stability
  • MIL-I-16923E Certified and RoHS 2011/65/EU Compliant
Close

3M Scotchcast Electrical Resin 253

This product offers many of the advantages of 3M™ Scotchcast™ Electrical Resin 241. Its thixotropic nature renders it useful in dipping, brushing or troweling applications where resistance to running or sagging is a requirement.

Close

3M Scotchcast Electrical Resin 255


  • 3M Scotchcast Electrical Resin 255 (18 lb)
  • This is a two-part, oven-curing, semi-flexible, filled, flame retardant, epoxy liquid resin.
Close

3M Scotchcast Electrical Resin 260

  • Has 12 to 16-second gel time at 380 degrees F (193 degrees C)
  • Useful for moisture-proofing and insulating armatures, stators, buss bars and toroid cores
  • Comes in green color
  • 44.1-lb capacity
  • Withstands temperatures of 356 degrees F (180 degrees C)
  • Compatible with electrostatic spray, fluid bed dip and venturi spray‎
  • Heat-, chemical- and moisture-resistant
  • UL Listed, EIS Approved and RoHS 2011/65/EU Compliant‎
Close

3M Scotchcast Electrical Resin 262

  • Has 12 to 16-second gel time at 380 degrees F (193 degrees C)
  • Useful for moisture-proofing and insulating armatures, stators, buss bars and toroid cores
  • Comes in red color
  • 60-lb capacity
  • Withstands a temperature range of 32 to 266 degrees F (0 to 130 degrees C)
  • Compatible with electrostatic spray, fluid bed dip and venturi spray‎
  • Heat-, chemical- and moisture-resistant
  • ASTM Approved and RoHS 2011/65/EU Compliant
Close

3M Scotchcast Electrical Resin 263

  • Has 7 to 15-second gel time at 380 degrees F (193 degrees C)
  • Useful for moisture-proofing and insulating armatures, stators, buss bars and toroid cores
  • Comes in green color
  • 60-lb capacity
  • Withstands temperatures of 356 degrees F (180 degrees C)
  • Compatible with electrostatic spray, fluid bed dip and venturi spray‎
  • Heat-, chemical- and moisture-resistant
  • UL Listed, EIS Approved and RoHS 2011/65/EU Compliant‎
Close

3M Scotchcast Electrical Resin 265

  • Solids insulation renders good adhesion, thermal and electrical properties
  • Has 60-second gel time at 379.4 degrees F (193 degrees C)
  • For a variety of coating, bonding and saturation applications
  • Comes in clear white color
  • 50-lb capacity
  • Withstands temperatures of 356 degrees F (180 degrees C)
  • Applied by trickle, spray or dip processes
  • Provides excellent electrical properties and thermal shock resistance
  • UL Listed, ASTM Approved and RoHS 2011/65/EU Compliant
Close

3M Scotchcast Electrical Resin 266

3M™ Scotchcast™ Electrical Resin 266 is a one-part, motor, transformer, and coil insulating epoxy resin. It is specially formulated for use in the electrostatic fluid bed process, but can also be used in conventional fluid beds.

3M™ Scotchcast™ Electrical Resin 266 is a one-part, green pigmented, rapid heat curing powder coating. It is designed to provide a continuous, tough moisture and chemical resistant dielectric coating for motor stators, armatures, and transformers. It can be applied via cold electrostatic fluid bed, hot venturi spray or hot fluid bed dip method.

Close

3M Scotchcast Electrical Resin 275

  • This resin shows excellent flexibility while maintaining good dielectric strength.
  • This ability to bend makes it ideal for coating wire products or other flexible assemblies.
Close

3M Scotchcast Electrical Resin 280

  • 3M™ Scotchcast™ Electrical Resin 280 is characterized by its high-temperature stability,
  • superior electrical properties and thermal shock resistance.
Close

3M Scotchcast Electrical Resin 281

  • These filled versions of 3M™ Scotchcast™ Electrical Resin 280 offer many of the key features of 280 plus lower shrinkage,
  • improved thermal and mechanical shock resistance, and high thermal conductivity.
Close

3M Scotchcast Electrical Resin 282

3M™ Scotchcast™ Electrical Resin 282 is a thixotropic version of 281 offering many of the same advantages. It is also used in dipping, brushing or troweling applications where resistance to running or sagging is a requirement.

Close

3M Scotchcast Electrical Resin 3

  • 80 Shore D hardness
  • Has 21-minute gel time at 250 degrees F (121 degrees C)
  • Suitable for impregnating, potting and encapsulating applications such as coils, transformers and modules
  • Comes in clear amber color
  • 1-gal capacity
  • Withstands a temperature range of 32 to 266 degrees F (0 to 130 degrees C)
  • Elongates 2% longer than its original size for easy insulation or wrapping
  • Low-viscosity and fine-wetting properties allow complete impregnation of fine wires in coils
  • MIL-I-16923E Certified and RoHS 2011/65/EU Compliant
  • 10 lbs/kit
Close

3M Scotchcast Electrical Resin 5

3M™ Scotchcast™ Electrical Resin 5 is a general purpose, very low viscosity, chemical and moisture-resistant, transparent epoxy with a long pot life and low exotherm when compared to similar products.