3M BALL MARKERS
- 5-ft detection range
- Self-levelling design for precise and horizontal positioning
- Offers easy marking of buried power lines
- Passive antenna encased in green water-resistant polyethene shell
- Withstands a temperature range of -4 to 122 degrees F (-20 to 50 degrees C)
- Works without any external power source
3M Dynatel Advance Cable/Pipe Locator 2220M
• Locates pipes, cables and tracer wire
• Detects power signals
• Locates Sondes and pipeline inspection cameras
• Detects cathodic protection signals
3M Dynatel Cable/Pipe/Fault and Marker Locator 2273M-iD
- Gas Industry
- Power Industry
- Fault Finding
- Read, Write and Locate Markers
3M ELECTRONIC MARKING SYSTEM(EMS)
- They can be installed near or above buried assets
- They are easy to follow, creating a detectable path above ground
- For use in open trench and HDD (Horizontal Directional Drilling) applications
3M Marker Solutions
- Saves time and money
- Improves asset management
- Damage avoidance.
- Lifetime warranty for electronic markers
3M™ Dynatel™ Marker Locator 1420 EMS-iD
- Congestion & Grounding
- Common Trench
- Soil Condition or Type
- Facility access Limitation
- Multiple utilities of same type
- Absence of metallic conductor(s)
- Multiple markers in area
- Need to access items of particular interest in buried
facilities that are not locatable using EM locators
CMM-10
The most important features of CMM-10 are:
- Autoranging/manual range selection.
- DATA HOLD function, for holding measured values.
- REL function, which allows you to make measurements relative to a stored reference value.
- Continuity test with acoustic signalling (beeper).
- AUTO-OFF function.
- Display 3 7/8 digits (5000 max).
CMM-40
A rugged, hand-held Industrial Multimeter. The CMM-40 was designed for the measurements of:
-
AC/DC voltage
-
AC/DC current
-
resistance
-
capacitance frequency
-
duty cycle
-
temperature
-
testing diodes
-
continuity
CMP-1006
- safe, insulated measuring clamps,
- autoranging/manual range selection,
- DATA HOLD function, for holding measured values,
- backlit LCD,
- DC ZERO mode of measurement for DC current, possibility to zero the display and reading relative actual value less stored zero value,
- MAX/MIN function,
- over range indication,
- AUTO-OFF function.
CMP-2000
Universal clamp meter, enabling the maintenance of current measurements up to 2000 A, with the diameter of the clamp as 57 mm, and bus bar to 70 * 18 mm
The instrument has an electronic overload protection of all functions and ranges.
CMP-400,CMP-401
Details DC current measurement (CMP-401 only) and AC current. AC/DC voltage measurement up to 600 V. Resistance measurement and continuity
CMP-600
- AC and DC current measurement (TRUE RMS) up to 600A.
- AC and DC voltage measurement (TRUE RMS) up to 600V.
- Acoustic signalling programmable for instances of exceeding the MAX/MIN values set.
- Resistance measurement and continuity test:
- continuity test with acoustic signalling (for resistance below 1000). - Frequency measurement.
- Diode test.
- Wireless cooperation with many transmitters.
- CMP-600R compatible with a computer via a USB interface. Software provided.
- The comfortable case for the meter and accessories.
Digital Calipers
Large high-contrast digital display. The measuring faces are precision-lapped. 412805Size 150; 412818Size 150; 412821 Size 150-300-Digital caliper witlabsolute scale, no
Digital Torque Meter (HP-10 / HP-50 / HP-100)
Digital Torque Meter
DT-510 DIGITAL THERMOMETER
Specifications Measurement range -40 to 800 ℃ (depends on sensor performance) Sensor Thermocouple K-class (CA) Resolution 0.1 ℃ /
External micrometers 1/100 graduation
Version: Precision lapped, carbide-tipped measuring faces. Hardened and ground measuring spindle. Locking by locking lever. With ratchet and hand temperature protection.
HELLERMAN Digital Clamp Meters TBM3030 600A AC
- Jaw size 2 6mm
- Large LCD display
- Diode
- Continuity
- Relative zero
- Data hold
hellermn tyton multimeters whole range
- Robust and splash-proof, the meters can be used to measure various electrical parameters.
- They have four push button type selector switches and a rotary switch.
- The rotary switch provides a selection of measurement parameters:
- AC and DC voltage or current (including mirco and nano), frequency, resistance, continuity (with buzzer), capacitance and diode check.
HOLEX 654240,654250,65400,654390, 654460, 654470
Test certificate Manufacturer’s test certificate
Torque measuring accuracy ±0.5 %
Interface USB interface
The direction of tightening For right and left-hand tightening
Calibration O4
HP-10 / HP-50 / HP-100 Torque Meter
- For measure torque setting of screw drivers, torque driver
- For inspecting, data collection and Quality control
Hunter 191A Thermometer
- Fast, Accurate tip measurements using CA Wire sensor
- Large Display for easy reading
- Easy and quick sensor replacement
Hunter 328 Video Microscope
- Consist of Optical Microscope, CCD Camera and LCD Display
- View Tiny object on screen by video signal camera
- Digital colourful picture with high resolution LCD display
- Zoom objective to desire view
- USB access to computer for data collection and storage
Hunter 336 Electrostatic Field Meter
- For Static Measurement and Ion Balance voltage measurement
- Four Different working mode
- Adjustable test distance
- LCD / Digital Display
- Light, compact in size
- ESD Safe in Design