Showing 1–24 of 25 results

Close

3M 425 Aluminium Foil Tape

Aluminum foil tape is a 5 mil nominal dead soft aluminum foil backing combined with a transparent acrylic adhesive designed to seal the cut edges of 3M Duct Wrap and Interim mats to complete the total encapsulation.

  • 5-mil aluminum foil
  • Acrylic adhesive
  • Tensile strength: 30 lbs./in.
  • width (525N/100 mm)
Close

3M Aluminum Foil Tape 425

  • Highly engineered acrylic adhesive provides long term durability but removes cleanly after harsh masking applications
  • Withstands exposure to flame, weathering, moisture, and UV
  • Heat and light reflective tape protects surfaces and enhances lighting efficiency
  • Dead soft aluminum foil backing conforms to curved and uneven surfaces
  • Recognized by UL to UL 746C and Classified by UL to UL 723, Class "L" for low flammability rating
  • Contains plastic core center
Close

3M Fire and Barrier Tape

Ideal for sealing perimeter joints (curtain wall joints) and other construction joints as well as some through-penetration applications. When installed
properly (using mineral wool or backer rod if needed), this tape acts as a barrier to fire, water, smoke and sound.
Ideal for sealing perimeter joints (curtain wall joints) and other construction joints as well as some through-penetration applications. When installed
properly (using mineral wool or backer rod if needed), this tape acts as a barrier to fire, water, smoke and sound.

  • Up to 4-hour fire protection in construction joints (ASTM E1966/UL 2079)
  • Up to 3-hour fire protection in perimeter joints (ASTM E2307)
  • Up to 2-hour fire protection in through-penetration applications (ASTM E814/UL 1479)
  • Great for water protection: meets UL Water Leakage Test, W Rating — Class 1 requirement; tested and immediately passed ASTM D 6904 Rain Resistance Test.

 

Close

3M Fire Barrier CP 25WB+ Sealant

Our most popular fire stop sealant approved up to 4-hours when used with most plastic and metal pipes.

  • Australian standard testing in accordance with AS1530.4
  • International testing in accordance with EN1366
  • Provides up to 4-hours
  • Superior adhesion – bonds to concrete, metals, wood,
    plastic and cable jacketing
  • Intumescent – expands when heated to seal around items
    consumed by fire
    * Not approved for use with CPVC pipes
Close

3M Fire Barrier Duct Wrap 615+

Manufactured with a man-made vitreous spun fiber, a calcium magnesium
silicate (CMS) wool technology which is bio-soluble, allowing for low thermal
transfer properties in a lightweight, low profile, easy to apply the product.
Lightweight 96 kg/m3 and thin 38 mm for easier application
Broadest and most economical tested duct hanging support system in the
industry

  • Up to 2 hour fire protection tested to AS530.4
  • Certified for grease ducts to ASTM E 2336 (including ASTM E 119 engulfment) in 2-layer systems
  • Certified for ventilation ducts to ISO6944 in 1-layer systems and for other key life-safety duct applications
  • Available in 38mm x 609 mm x 7.6m & 38mm x 1220 mm x 7.6m rolls
Close

3M Fire Barrier Expantrol Flexible Intumescent Strip (E-FIS)

Designed to seal the air space between doors and frames and for glazing fire resistant glass to help prevent the passage of smoke and flames in the event of a fire.

  • Expands when heated to seal around objects consumed by fire.
  • Retards spread of toxic by-products of combustion
  • Excellent flexibility, easy, cost-effective installation
  • Low flame spread and smoke development
  • Can be cut to fit irregular shapes
  • No special tools required
  • Non-flame supporting
  • Low odour
Close

3M Fire Barrier IC 15WB+ Sealant

Affordable UL, general-purpose sealant approved up to 4-hours when used with plastic and metal pipes.

  • Australian standard testing in accordance with AS1530.4
  • International testing in accordance with EN 1366 and
  • ASTM E814 (UL Listed)
  • Provides up to 4-hours
  • CPVC compatible
  • Superior adhesion – bonds to concrete, metals, wood, plastic, and cable jacketing
  • Intumescent – expands when heated to seal around items consumed by fire
Close

3M Fire Barrier Moldable Putty MP+ Sticks

Designed to firestop a wide variety of through-penetrations, including cable, conduit, insulated pipe, and metal pipe.

  • Pliable – can form into almost any desired shape
  • Will not dry out or crumble – can be sealed for reuse
  • Available in 36 x 152 mm and 36 x 279 mm stick sizes
Close

3M Fire Barrier Moldable Putty MP+ Sticks & Pads

Designed to firestop a wide variety of through-penetrations, including cable, conduit, insulated pipe, and metal pipe.

  • Pliable – can form into almost any desired shape
  • Will not dry out or crumble – can be sealed for reuse
  • Available in 3 mm thick pads:
  • 102 x 203 mm, 178 x 178 mm and
  • 241 x 241 mm sizes
Close

3M Fire Barrier Mortar

Lightweight, gypsum-based and endothermic fire stop that is ready for mixing with potable water.

  • Up to 2-hour fire ratings per EN-1366-3
  • Variable mix ratio permits self-leveling as well as trowelable application
    consistencies including concrete floors with 100 mm minimum thickness
  • Excellent adhesion – bonds to concrete, metals, wood, plastic, and cable jacketing
  • Re-enterable/repairable with common trade tools
  • Acts as a heat sink, reducing the likelihood of combustible matter igniting on the
    unexposed side of the assembly
  • Dry mix available in 18.9 litre (12.7 kg) pails and 19.9 kg bags
Close

3M Fire Barrier Packing Material PM4

Lightweight packing material to be used with through-penetration fire stops.

  • Tested in accordance with ASTM E814 (UL Listed)
  • Convenient, hand-tear dispensing
  • For almost any through-penetrating firestop project
  • Easy to use and less irritating to skin than competitive products
Close

3M Fire Barrier Pass-Through Devices

Re-enterable and caulk-free.

  • Australian standard testing in accordance with AS1530.4, International testing in accordance with EN1366 and ASTM E814 (UL Listed)
  • Provides up to a 4-hour integrity rating
  • Stackable for penetrant versatility
  • Hinged for easy retrofit installation around cables
  • Sizes available in: Round 50.8 mm (2"), Round 101.6 mm (4"), Square 63.5 mm (2.5"), and Square 101.6 mm (4")
Close

3M Fire barrier Plenum wrap

Applied 1-layer thick, 3M™ Fire Barrier Plenum Wrap 5A+ creates a fire-resistive enclosure that can reduce the flame spread and smoke spread ratings to acceptable levels for return air plenums. It is tested to UL 910 (NFPA 262), UL 1887, and ASTM E 84.

 
Close

3M Fire Barrier Sealant FD 150+

  • Firestop tested up to 3 hours in accordance with ASTM E 814 (UL 1479) & CAN/ULC S115
  • Fire Resistive Joint System tested up to 4 hours in accordance with ASTM E 1966 (UL 2079)
  • ±19% movement capability
  • Helps minimize noise transfer
  • Applied with conventional caulking equipment (excellent caulk rate)
  • Halogen-free
  • Sag-resistant
  • Excellent adhesion
  • Paintable
  • Re-enterable/repairable
Close

3M Fire Barrier Watertight Sealant 1000 NS

Non-slumping silicone with up to 3-hour fire protection.

Close

3M Fire Barrier Watertight Sealant 1003 SL

Self-leveling silicone with up to 4-hours of fire protection.

  • Ideal for complex applications
  • Fast solution
  • Floor application
Close

3M Fire Barrier Watertight Silicone 3000 WT Sealant

High-performance intumescent silicone achieves the benefits of a fire stop and watertight seal.

  • Provides up to 4-hours
  • Excellent weatherability – ideal for fast-track construction
  • Cures upon exposure to atmospheric humidity
  • Re-enterable and repairable
Close

3m Fire Dam Paint

  • Provides up to 4-hour fire protection in construction joints per ASTM E 1966 (UL 2079)
  • Provides up to 3-hour fire protection in perimeter fire barrier systems (curtain walls) in accordance with ASTM E 2307
  • Highly elastic sealer is compression/extension tested up to ± 50% of nominal joint width without cracking
  • Resists freezing and thaws for a consistent seal in a range of conditions
  • Water-based formula cleans up easily and saves time
Close

3M FireDam 150+ Sealant

Tested and approved for single metallic pipe penetrations and
construction joints.

  • Water-based for easy installation, cleanup and disposal
  • Endothermic fillers absorb heat and release chemically-bound water
  • High-solids formula means no shrinkage
  • Multi viscosity grade offers excellent caulking properties
  • Available in limestone or red colour
  • Excellent movement capabilities
  • Limestone Red Low VOC
Close

3M Interam E-5A-4 Mat

Resists heat and fire to protect structural steel and provide electrical circuit protection around cables, cable trays, and conduits.

  • Hydrocarbons pool fire approved systems
  • Endothermic – releases chemically bound water to cool the outer surface when exposed to high temperatures
  • Made of a combination of ceramic fibres and inorganic endothermic material
  • Easily cuts to size and flexible
  • 10 mm thick x 62.23 cm width x 6.1 m length roll size
Close

3M Interam Endothermic Mat

3M™ Interam™ Endothermic Mat opens up new opportunities in building design in allowing engineers to fulfill the requirement of the
Close

3M Smoke and Sound Tape

Ideal for providing a smoke and sound seal for construction
joints and through penetration applications in non-fire-rated
wall and floor assemblies, including smoke partitions and
acoustic assemblies. When installed properly, this material is
used to provide a smoke seal to mitigate the spread of smoke
and toxic gas, as well as help, reduce the transmission of sound
(refer to installation instructions — may require mineral wool
or backer rod to achieve STC ratings).

Close

3M™ Fire Barrier Composite Sheet CS-195+

  • Ideal for fire-stopping blank openings and through-penetrations of multiple cables, pipe ducts and cable trays.
  • Great substitude to firestop mortar in the wall
  • No mixing or damming required
  • Easy to install using common trade tools
  • Easy to fasten, bolt punch or drill through and use self-tapping screws or anchor bolts
  • Re-enterable
  • Available in the following sizes: 40.64 x 71.12 cm........(bulk and boxed) 91.44 x 60.96 cm........(bulk and boxed) 91.44 x 91.44 cm........(bulk and boxed) 91.44 x 104.14 cm.......(bulk and boxed) 71.12 x 132.08 cm.......(bulk only)
  • Provides up to a 4-hour fire rating
Close

3M™ Fire Barrier Pillows

Specifications

Brand
3M™
Consumer Label
No
Fire Rating
3 Hour
Product Type
Pillows
Size
Large, Medium, Small
Smoke Seal
Yes
Volatile Organic Compounds (VOCs)
See Safety Data Sheet, Regulatory Data Sheet
Water Tight
No