Close
3M Cold Shrink Cable Jointing Kits, 11KV/22KV/33KV
- One part joint body
- 100% tested after manufacture
- No heat required
- Tool free installation
- Permanent radial pressure
- Suitable for paper and polymeric cables
- Compatible with compression and mechanical connectors
- Low temperature installation
- Provides consistent installation quality
Close
3M heat shrink termination kit low voltage power cable upto 1100v/1.1kv
- Available for 1-Core(1C),3-Core(3C),3.5-Core(3.5C) and 4-Core(4C) power cables
- Provides excellent environmental protection and moisture sealing
- Wide conductor size ranges upto 500 mm2
Close
3M HIGH VOLTAGE 66KV/110KV/132KV
- The versatile design of the silicone cold shrink Termination body allows installation on a wide range of cable sizes and types and a fast and easy installation at temperatures ranging from - 20°C to + 50°C.
- No heat, flame, or special tools are needed during splice body installation.
- Accommodates crimp or mechanical Lugs up to 110mm in diameter.
- Wide application range covering several cable cross sectional areas from 120mm² – 2000mm².
- Solderless earth connection to copper screen wires or lead sheath.
- Silicone rubber Cold Shrink outer rain sheds and sealing PST’s provide physical protection and moisture sealing of the completed Termination. Datasheet Page 2 of 3 Issue 7
- The Silicone outer rain sheds of the Termination makes it ideal for zones with maximum environmental contamination, industrial or coastal.
- Creepage path connection for additional protection in areas of high pollution.
Close
3M High Voltage Cold Shrink Termination 66kv/72.5kv
- The versatile design of the silicone cold shrink Termination body allows installation on a wide range of cable sizes and types and a fast and easy installation at temperatures ranging from - 20°C to + 50°C.
- No heat, flame, or special tools are needed during splice body installation.
- Accommodates crimp or mechanical Lugs up to 110mm in diameter.
- Wide application range covering several cable cross sectional areas from 120mm² – 2000mm².
- Solderless earth connection to copper screen wires or lead sheath.
- Silicone rubber Cold Shrink outer rain sheds and sealing PST’s provide physical protection and moisture sealing of the completed Termination. Datasheet Page 2 of 3 Issue 7
- The Silicone outer rain sheds of the Termination makes it ideal for zones with maximum environmental contamination, industrial or coastal.
- Creepage path connection for additional protection in areas of high pollution.
Close
3M High Voltage Cold Shrink Termination Kit 110kv(123kv)/132kv(145kv)
- Light weight
- Dry design - does not require liquid dielectric
- Can be installed at any angle or inverted
- No special maintenance required
- Top - and bottom - sealing system based on proven cold shrink technology
- Alternating sheds (skirts)
- One-piece factory-tested push-on termination body
Close
3M MEDIUM VOLTAGE 11KV/22V/33KV
- Viable cost-based alternative to heat shrink cable joints
- Simple installation – easier to use in enclosed areas
- Safe installation – no torches or heat required
- Less room for cable jointer error
- Extensive quality and factory testing programme
- Lower installed cost – compared to many competitive cable joint products
- Accommodates a wide range of cable sizes
- Rated from 3.6/6.6 (7.2)kV up to 19/33 (33)kV
