Close
3M 3747 Q
| Typical Use: | Good adhesion to a wide variety of substrates such a hard and soft woods, fabric, rigid ABS, GRP, Polycarbonate and PVC. |
| Chemical Composition: | EVA |
| Color: | Tan |
| Components: | 1 part |
| Cure System: | Room Temperature |
| Cure Time: | 45s |
| Elongation: | 1300% |
| Flash Point: | 265 °C |
| Hot Melt Stick Width: | 5/8 in |
| Hot Melt Type: | Sticks |
| Impact Resistance: | 11 in/lb @ -18 °C; 25 in/lb @ 22 °C |
| Key Specifications: | FDA 175.105 |
| Peel Strength: | 35 N/10mm |
| Shear Strength: | 2.9 MPa @ 22 °C |
| Specific Gravity: | 0.97 |
| Tensile Strength: | 5.1 MPa @ 22 °C |
| Viscosity: | 4,100 @ 190 °C |
Close
Close
3M 3748 VO-Q
- Tough, flexible bond provides good thermal shock resistance
- Adheres to difficult-to-bond plastics such as polyolefins
- 100 percent solids bonds with negligible shrinking or contracting
- Excellent adhesion ensures reliable, permanent bond
- Self-extinguishing properties for electrical applications
Close
3M 3764 Q
| Typical Use: | Bonds acrylic, polystyrene and polyolefins. |
| Chemical Composition: | EVA |
| Color: | Clear |
| Components: | 1 part |
| Cure System: | Room Temperature |
| Flash Point: | 267.7 °C |
| Hot Melt Stick Width: | 5/8 in |
| Hot Melt Type: | Sticks |
| Key Specifications: | FDA 175.105 UL V2 |
| Peel Strength: | 14 piw @ 22 °C |
| Shear Strength: | 390 @ 22 °C |
| Specific Gravity: | 0.95 |
| Viscosity: | 6,000 @ 190.5 °C |
Close
3M 3789 Q
| Typical Use: | For use on wood and flexible vinyl. |
| Chemical Composition: | Polyamide |
| Color: | Brown |
| Components: | 1 part |
| Cure System: | Room Temperature |
| Flash Point: | 200 °C |
| Hot Melt Stick Width: | 5/8 in |
| Hot Melt Type: | Sticks |
| Peel Strength: | 16 piw @ 22 °C |
| Shear Strength: | 570 @ 22 °C |
| Specific Gravity: | 0.95 |
| Viscosity: | 5,250 @ 190.5 °C |
Close
Close
3M 6111HT
- Sprayable, 100% solids adhesive without volatiles
- Offers excellent adhesion to polypropylene and other low surface energy (LSE) plastics
- Extended open time allows for large surface assembly
- Features high temperature resistance
- Compatible with heat sensitive surfaces
- Bonds wide variety of substrates, including most foams, plastics, particle board, light gauge metals
