Showing 1–24 of 114 results

Close

3M VHB Tape 5962

  • High strength
  • Durable
  • Clean appearance
  • Black or white, 0.062 in (1.6 mm), modified acrylic adhesive and very conformable acrylic foam core bonds to a wide variety of substrates including powder coated paints and irregular surfaces
  • Eliminate drilling, grinding, refinishing, screwing, welding and clean-up
  • Creates a permanent seal against water, moisture and more by offering better gap filling capabilities
  • Pressure sensitive adhesive bonds on contact to provide immediate handling strength
  • Allows the use of thinner, lighter weight and dissimilar materials
  •  
Close

3M 2216

  • Non-sag properties provides greater bond line control than other non-sag epoxies
  • Very flexible bond is resistant to extreme shock, vibration and flexing, making it ideal for potting and applications in the transportation industries
  • Maintains a strong bond under expansion, contraction, and limited movement while retaining good strength after environmental aging
  • Excellent for cryogenic bonding applications or adhering substrates that will be exposed to extreme cold
  • Medium viscosity help minimize running, dripping, or migration while also self-leveling
  • Versatile bonding agent will adhered a wide variety of similar and dissimilar substrates, including metals and masonry
  • Can be heat cured to reduce curing times from 7 days to as a little as 30 minutes
Close

3M 3747 Q

Typical Use:Good adhesion to a wide variety of substrates such a hard and soft woods, fabric, rigid ABS, GRP, Polycarbonate and PVC.
Chemical Composition:EVA
Color:Tan
Components:1 part
Cure System:Room Temperature
Cure Time:45s
Elongation:1300%
Flash Point:265 °C
Hot Melt Stick Width:5/8 in
Hot Melt Type:Sticks
Impact Resistance:11 in/lb @ -18 °C; 25 in/lb @ 22 °C
Key Specifications:FDA 175.105
Peel Strength:35 N/10mm
Shear Strength:2.9 MPa @ 22 °C
Specific Gravity:0.97
Tensile Strength:5.1 MPa @ 22 °C
Viscosity:4,100 @ 190 °C
Close

3M 3748 Q

  • High temperature performance and thermal shock resistance
  • Formulated for bonding low surface energy plastics and coatings to dissimilar materials
  • High peel delivers long-term strength and durability

 

Placeholder
Close

3M 3748 VO-Q

  • Tough, flexible bond provides good thermal shock resistance
  • Adheres to difficult-to-bond plastics such as polyolefins
  • 100 percent solids bonds with negligible shrinking or contracting
  • Excellent adhesion ensures reliable, permanent bond
  • Self-extinguishing properties for electrical applications
Close

3M 3764 Q

Typical Use:Bonds acrylic, polystyrene and polyolefins.
Chemical Composition:EVA
Color:Clear
Components:1 part
Cure System:Room Temperature
Flash Point:267.7 °C
Hot Melt Stick Width:5/8 in
Hot Melt Type:Sticks
Key Specifications:FDA 175.105 UL V2
Peel Strength:14 piw @ 22 °C
Shear Strength:390 @ 22 °C
Specific Gravity:0.95
Viscosity:6,000 @ 190.5 °C
Close

3M 3789 Q

Typical Use:For use on wood and flexible vinyl.
Chemical Composition:Polyamide
Color:Brown
Components:1 part
Cure System:Room Temperature
Flash Point:200 °C
Hot Melt Stick Width:5/8 in
Hot Melt Type:Sticks
Peel Strength:16 piw @ 22 °C
Shear Strength:570 @ 22 °C
Specific Gravity:0.95
Viscosity:5,250 @ 190.5 °C
Close

3M 3792 Q

  • General purpose 100% solids adhesive
  • 50 second open time allows for adjustment and positioning
  • Ideal for POP displays, carton sealing, furniture, upholstery, and woodworking
Close

3M 4000UV

  • High performance, medium strength bonding allows for disassembly
  • Excellent UV resistance
  • Color stable sealing
  • Above and below the water line applications
  • 15-20 minute skin time helps keep jobs moving quickly
  • Medium strength - can be removed if rework or repair is necessary
  • Paintable immediately after application
Close

3M 4004

  • Off-white, 0.250 in. (6.4 mm) open-cell, semi-rigid urethane foam carrier
  • High shear adhesive with high temperature resistance
  • Durable foam is ideal for interior mounting applications
  • Thick foam dampens and prevents vibration and open-cell structure aids component cooling
Close

3M 4026

  • Off-white, 0.0625 in. (1.6 mm) open-cell, flexible urethane foam carrier
  • High shear adhesive with high temperature resistance
  • Durable foam is ideal for interior mounting applications
  • Ideal for bonding, attaching, and mounting
  • The foam dampens and prevents vibration
Close

3M 4108

  • Natural, 0.125 in. (3 mm) firm, high-density open-cell foam design helps trap moisture, dust and contaminants
  • Allows air or gas vapors to pass through for a breathable seal
  • Dampens sounds and absorbs vibration when used in electronic applications
  • Excellent cushioning characteristics and high absorbency
  • Offers high initial quick-stick to multiple substrates
  • Provides excellent shear strength and high temperature performance
Close

3M 4116

  • Natural, 0.062 in. (1.5 mm) firm, high-density open-cell foam design helps trap moisture, dust and contaminants
  • Allows air or gas vapors to pass through for a breathable seal
  • Dampens sounds and absorbs vibration when used in electronic applications
  • Excellent cushioning characteristics and high absorbency
  • Offers high initial quick-stick to multiple substrates
  • Provides excellent shear strength and high temperature performance
Close

3M 415

  • Ideal for printing applications, with high tack and adhesion to most paper stocks
  • Double sided adhesion increases dimensional stability for easy handling during print splicing
  • Excellent UV, moderate temperature and good humidity resistance to ensure performance in a variety of situations
  • Densified kraft paper liner ensures easy handling
  • Good adhesion to a variety of substrates, including low and high surface energy substrates
Close

3M 4200FC

  • Medium strength marine bonding allows for disassembly
  • Formulated for fast cure, providing rapid results
  • Tack-free in 1 hour and typically cures in 24 hours
  • Above and below the water line applications
  • Flexible and durable adhesion withstands stress
Close

3M 4314

  • Charcoal gray, 0.250 in. (6.4 mm) soft conformable, low-density, open-cell foam design helps seal out air, dust and light when compressed
  • Excellent cushioning characteristics and high absorbency
  • Dampens sounds and absorbs vibration when used in electronic applications
  • Offers high initial quick-stick to multiple substrates
  • Provides excellent shear strength and high temperature performance
Close

3M 4318

  • Charcoal gray, 0.125 in. (3 mm) soft conformable, low-density, open-cell foam design helps seal out air, dust and light when compressed
  • Excellent cushioning characteristics and high absorbency
  • Dampens sounds and absorbs vibration when used in electronic applications
  • Offers high initial quick-stick to multiple substrates
  • Provides excellent shear strength and high temperature performance
Close

3M 4504

  • Black, 0.250 in. (6.4 mm) thick closed-cell, high-density foam carrier helps seal out dust, light and moisture
  • Durable acrylic adhesive on one side of foam offers good aging and UV resistance
  • Designed for demanding gasketing, cushioning, damping and insulating applications
  • Conformable properties allow taping or sealing on curved or irregular surfaces
  • Designed to avoid stretching while leaving the liner in place
Close

3M 4508

  • Black, 0.125 in. (3.2 mm) thick closed-cell high-density foam carrier helps seal out dust, light and moisture
  • Durable acrylic adhesive on one side of foam offers good aging and UV resistance
  • Designed for demanding gasketing, cushioning, damping and insulating applications
  • Conformable properties allow taping or sealing on curved or irregular surfaces
  • Designed to avoid stretching while leaving the liner in place
Close

3M 4516

  • Black, 0.062 in. (1.6 mm) thick closed-cell high-density foam carrier helps seal out dust, light and moisture
  • Durable acrylic adhesive on one side of foam offers good aging and UV resistance
  • Designed for demanding gasketing, cushioning, damping and insulating applications
  • Conformable properties allow taping or sealing on curved or irregular surfaces
  • Designed to avoid stretching while leaving the liner in place
Close

3M 4611

 

  • Fast and easy-to-use permanent bonding method provides high strength and long-term durability
  • Virtually invisible fastening keeps surfaces smooth
  • Can replace mechanical fasteners (rivets, welds, screws) or liquid adhesives
  • Dark gray, 0.045 in (1.1 mil), general purpose adhesive with firm foam has added feature of high temperature resistance
  • Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up
  • Creates a permanent seal against water, moisture and more
  • Pressure sensitive adhesive bonds on contact to provide immediate handling strength
  • Allows the use of thinner, lighter weight and dissimilar materials
Close

3M 465

  • Bonds a wide variety of substrates including metal, glass, wood, paper, paint and many plastics
  • 60# Unbleached densified kraft liner allows for manual or hand applications
  • Provides consistently strong bonds in temperatures up to 250°F/121°C
  • Aggressive acrylic adhesive 400 bonds on contact
Close

3M 467MP

  • 2 mil nominal adhesive tape delivers exceptional shear strength for metals and HSE plastics
  • Provides very high resistance to solvents and humidity
  • Special PCK layflat liner for increased dimensional stability in high humidity storage, processing, shipping and application conditions
  • 4.2 mil PCK layflat liner virtually eliminates curling, buckling and rippling
  • 200MP acrylic adhesive is considered the industry standard for graphic attachment and general industrial joining applications
  • Temporarily repositionable adhesive improves placement accuracy, reducing rework
Close

3M 468MP

  • Delivers exceptional peel and shear strength for metals and HSE plastics
  • 58# polycoated kraft paper (PCK) liner offers a high strength bond for splicing and laminating applications
  • Thicker adhesives improve wet-out and adhesion on textured surfaces
  • Provides very high resistance to solvents and humidity
  • 200MP acrylic adhesive is considered the industry standard for graphic attachment and general industrial joining applications